Fall Beginning Camera

Class 7: Composition
Overview: We talked briefly about night sky photography and looked at PhotoPills (again) for their calculator, and then dove into Composition.
Night Sky Photography
Night sky photography is basically a three-part balancing act: darkness, stability, and exposure. Start by getting away from city lights (even a short drive helps), and go on a clear night when the moon is new or at least not bright. Use a sturdy tripod and either a remote shutter release or your camera’s 2-second timer so you’re not shaking the setup when you press the button. Shoot RAW if you can—it gives you way more flexibility later when you’re adjusting exposure, color, and noise.
For camera settings, switch to manual mode and manual focus. Use your widest lens (or widest zoom setting) and a wide aperture like f/2.8–f/4 if your lens allows it. Set ISO somewhere around 1600–6400 (start at 3200 and adjust), and pick a shutter speed that keeps stars from turning into little streaks. A simple starting point is the 500 rule:
(Exposure time = 500/[crop-factor × focal length])
So if you’re at 20mm full-frame equivalent, start around 25 seconds; if you’re on a crop sensor, use the full-frame equivalent focal length (or just shorten the shutter a bit). Take a test shot, zoom in on the stars, and adjust.
Focusing is the part that trips people up, so make it boring and repeatable. In live view, zoom in on a bright star (or a faraway light), then slowly adjust focus until it’s the smallest, sharpest point you can get—don’t trust the infinity mark on the lens. Once it’s sharp, don’t touch the focus ring again (a small piece of tape can help). Compose with intention: include a foreground element (tree line, barn, rock) to give the sky some context, and shoot a few variations because tiny changes in framing can make the image feel completely different.
Editing is where your photo becomes “night sky” instead of “mush.” In Lightroom (or similar), start with white balance (often cooler looks more natural), then lift exposure carefully and pull highlights down so stars don’t blow out. Add contrast with the tone curve, and use noise reduction—but don’t overdo it or you’ll smear the stars. If you want cleaner results, try stacking: take 10–30 identical frames and stack them in software (Sequator on Windows, Starry Landscape Stacker on Mac) to reduce noise while keeping detail.
Addendum: deep sky photography (galaxies/nebulae)
Deep sky is a different game because those subjects are faint and usually require longer total exposure time and tracking. The biggest upgrade is a star tracker (or equatorial mount) so the camera follows the sky’s motion; that lets you shoot longer exposures without star trails and gather way more signal. Deep sky images are typically made by capturing many shorter tracked exposures (plus calibration frames like darks/flats/bias), then stacking and processing in software (DeepSkyStacker, Siril, PixInsight). You can absolutely start with a telephoto lens and a tracker before you ever buy a telescope—what matters most is stable tracking, lots of total integration time, and patient processing.
Lecture
Composition can be done in the camera or cropped in post so shoot wider than you would normally.
Rule: when in doubt, fill the frame. What is the image about? The animal or its habitat? Get closer if you can.
Composition techniques:
-
Rule of Thirds: The classic rule of thirds involves mentally dividing your frame into a 3x3 grid and positioning your
subject or key elements along these lines or at their intersections. It’s a simple yet powerful technique to create balance and interest.
If you’re capturing a portrait, align the subject’s eyes or other important features with these power points. Similarly, when photographing landscapes, position the horizon or prominent elements along the gridlines or at the intersections. Focus on the nearest eye.
-
Why It Works:
- The rule of thirds encourages you to avoid placing your subject dead center in the frame. Centered compositions can sometimes feel static or less engaging.
- By using the intersections, you introduce asymmetry and dynamic tension. The viewer’s eye naturally moves along these lines, adding interest and guiding their gaze.
-
Variation in Intersection Importance:
- While all four intersections are relevant, some photographers argue that the top-left and bottom-right intersections (diagonally opposite each other) tend to be more visually powerful.
- The top-left intersection is often associated with the starting point for reading an image (like reading a book from left to right). Placing a subject there can create a sense of anticipation.
- The bottom-right intersection is where the eye tends to linger. It’s a strong point for emphasizing a subject or creating a focal point.
- Leave space - put your subject on a third line and let them look out to the other one.
-
Why It Works:
-
Leading Lines: Learn how to use lines, whether they’re actual lines in your scene (like roads, fences, or rivers) or implied lines
(like the direction someone is looking), to guide the viewer’s eye through your photo. They draw your attention, create balance, and add interest.
-
Types:
- Vertical - from the bottom to the top, add depth.
- Horizontal - side to side. Can intensify a scene when they cut across the frame (think of a road).
- Diagonal lines - can converge on a point and pull us along.
- Curved lines - like a river or winding path, elegant and fluid.
-
Finding leading lines:
- Look around! Roads, bridges, fences, shorelines, architectural features - all fair game. Don't use railroad tracks - it's illegal and a bunch of photographers have died thinking they'll hear the train.
- Even everyday objectslike the lines on a basketball court or the edge of a table can become leading lines.
Others:
- Framing: Use natural or man-made frames (think archways, windows, or tree branches) to draw attention to your subject.
- Foreground and Background: Pay attention to both foreground and background elements. Sometimes what’s happening behind your subject is just as important as the subject itself.
- Symmetry and Patterns: Symmetry and patterns in photography, such as reflections, repeating shapes, or perfectly aligned elements, can create striking compositions.
- Negative Space: Use empty or negative space intentionally. Sometimes what you leave out of the frame is just as impactful as what you include.
-
Balance and Visual Weight: Distribute visual weight in your composition. Balance doesn’t always mean perfect symmetry; it’s about achieving harmony.
- Symmetrical Balance
- Asymmetrical Balance
- Color Balance
- Tonal Balance
- Conceptual Balance
- Viewpoint and Perspective: Experiment with different viewpoints—get low, climb high, or shoot from unexpected angles. Changing your perspective can transform an ordinary scene.
- Depth and Layering: Add depth to your photos by layering foreground, middle ground, and background elements to create a sense of dimension.
-
Golden Triangle: One popular concept related to triangles is the golden triangle, which divides the frame into four triangles.
- Here’s how it works:
- Draw a diagonal line from one corner of the frame to the opposite corner.
- Add two more lines from the remaining corners to intersect the first line at a right angle.
-
The golden triangle suggests three approaches:
- Fill one of the triangles with a main subject.
- Align diagonal subject matter with at least one of the diagonal golden triangle lines.
- Line up a significant point in the composition with a point of intersection.
-
Golden Spiral
- Where to Find the Golden Spiral?
- Look at the shell of the Nautilus, a marine cephalopod. Its shell follows the Golden Spiral precisely.
- In photography, you won’t always find a literal spiral, but you can create a visual path that mimics its flow. Think of it as a subtle, invisible guide within your frame.
-
Types:
-
Using the Golden Spiral in Your Compositions:
- Leading Lines: Arrange elements (like roads, fences, or tree branches) to follow the spiral’s path. These lines can lead the viewer’s eye along the curve.
- Subject Placement: Position your main subject near one of the spiral’s intersections. This draws attention and adds balance.
- Crop and Framing: During post-processing, consider cropping your image to align with the spiral. Use the spiral’s flow to guide your composition.
- Emphasis and Dominance: Whether through selective focus, lighting, or positioning, make sure your viewer’s eye goes exactly where you want it to.
Rule of Odds
Direct the viewer with light and dark values - look at old paintings.
Paris art
Storytelling
-
Shoot from Above, Below, and the Center:
-
These three approaches offer different perspectives and can significantly impact the visual storytelling in your photographs:
- From Above (Bird’s Eye View): Capturing scenes from a high vantage point provides a unique view. It can evoke a sense of freedom or omnipotence. Think of it as looking down on the world.
- From Below (Low Camera Angles): Shooting upward can elevate your subject, making it appear more powerful or imposing. This angle often creates a sense of intimidation or authority.
- From the Center (Straight On): Shooting straight at eye level creates intimacy and a direct connection with viewers. It invites them to be part of the scene.
- Working from the Side: Offers a profile view that can add depth and context.
- Wide Angles Views: Capture a broader scene, providing more context and often emphasizing scale.
- Close Ups Shots: Highlight fine details and evoke strong emotions by focusing tightly on the subject.
- Tilted Angles: Add a dynamic, sometimes unsettling feel, which can intensify the viewers’ experience.
- Storytelling often needs more than one photo to tell the story.
-
These three approaches offer different perspectives and can significantly impact the visual storytelling in your photographs:
Camera Angles | Understand the Psychology of 7 Powerful Angels
- Bird’s Eye View / High Camera Angles: Capturing from above can create a sense of freedom or omnipotence, offering a dramatically different perspective.
- Shooting from Below / Low Camera Angles: Elevates the subject, making it appear more powerful or imposing.
- Looking Straight On / Point-of-View: Creates intimacy and direct connection with viewers, making them feel part of the scene.
- Working from the Side: Offers a profile view that can add depth and context.
- Wide Angles Views: Capture a broader scene, providing more context and often emphasizing scale.
- Close Ups Shots: Highlight fine details and evoke strong emotions by focusing tightly on the subject.
- Tilted Angles: Add a dynamic, sometimes unsettling feel, which can intensify the viewers’ experience. Called Dutch angle.
What is Balance in Photography? - 42West, Adorama
- Symmetrical Balance
- Asymmetrical Balance
- Color Balance
- Tonal Balance
- Conceptual Balance
Homework
Composition Techniques- Rule of Thirds Exercise: Take photos using the rule of thirds. Compose shots with the subject at different intersections.
- Leading Lines Practice: Find and photograph leading lines in your environment.
- Symmetry and Patterns: Capture photos that emphasize symmetry and patterns.
- Framing Techniques: Use natural frames (like windows or arches) to frame your subject in photos.
- Negative Space: Take photos that utilize negative space effectively.
- Different Perspectives: Shoot the same subject from different angles and heights. Use ABC.
Resources
https://greatbigphotographyworld.com/blog/compositional-rules-in-photography-start-here
Storytelling for Photographers – Narrative Composition
Winners of the 2025 Sony World Photography Awards Open Competition – The Atlantic
https://www.theatlantic.com/photo/2025/03/winners-2025-sony-world-photography-awards-open-competition/681999/
Winners of the 2023 Sony World Photography Awards – The Atlantic
https://www.theatlantic.com/photo/2023/03/winners-2023-sony-world-photography-awards/673391/
500 Rule Photography Calculator for Milky Way Exposure | PhotoPills

Camera Metering, Sunny 16, White Balance, Focal Length, and Drive Modes
Light meters
Your camera has an in-camera reflective meter (sometimes called a radiant meter). It measures the light bouncing off your scene and coming into the lens, then suggests exposure settings (shutter speed, aperture, ISO) that land the scene around 18% gray. That “middle gray” target is why snow can look dingy and a black dog can look weirdly bright if you trust the meter without thinking.
A handheld incident meter does the opposite. It measures the light falling onto the subject. You stand where the subject is, point the meter back toward the camera, and it tells you what exposure matches the actual light. Because it reads the light before it hits the subject, it doesn’t get tricked by bright whites, dark clothing, or shiny surfaces. That’s why incident meters shine in studios and controlled lighting.
Metering modes (your camera may not have all of these)
Most cameras offer a few ways to decide what part of the frame the reflective meter should pay attention to.
- Evaluative / Matrix
- Splits the frame into zones and makes a “best guess” exposure for the whole scene
- Use it for general shooting, landscapes, street, and evenly lit scenes
- Center-weighted
- Prioritizes the center area but still considers the rest of the frame
- Use it for portraits or anything where your subject sits near the center and the background is brighter or darker
- Spot
- Reads a tiny area (often 1–5% of the frame)
- Use it for high-contrast scenes or when you need one specific area exposed “right” (wildlife, macro, stage lighting)
- Partial (common on Canon)
- Like spot, but a slightly bigger area (often 10–15%)
- Use it for backlit subjects or when spot feels too picky
- Highlight-weighted
- Protects the brightest parts so you don’t blow highlights
- Use it for concerts, performances, harsh backlight, anything with bright hotspots
Sunny 16 rule
The Sunny 16 rule is a quick way to get a solid exposure outdoors.
On a bright sunny day, start here:
- Aperture: f/16
- Shutter speed: set it to about 1 / ISO (your ISO’s reciprocal)
- ISO: 100 is the classic starting point
Examples:
- ISO 100 → start around 1/100 sec at f/16
- ISO 200 → start around 1/200 sec at f/16
- ISO 400 → start around 1/400 sec at f/16
Equivalent exposures (same brightness, different settings)
Once you’ve got a correct exposure, you can trade shutter speed and aperture back and forth. Same light. Same brightness. Different look.
If your starting point is ISO 100, f/16, 1/100, here are equivalent exposures:
| Aperture | Shutter speed | What changes |
|---|---|---|
| f/16 | 1/100 | More depth of field, slower shutter |
| f/11 | 1/200 | One stop brighter aperture, one stop faster shutter |
| f/8 | 1/400 | Less depth of field, faster shutter |
| f/5.6 | 1/800 | More background blur, even faster shutter |
| f/4 | 1/1600 | Shallow depth of field, great for freezing motion |
That table is your “I want blur but I don’t want to guess” cheat sheet.
Sunny 16 quick adjustments
Keep the shutter speed near 1 / ISO, and change the aperture based on the light.
- Bright sun on sand or snow: f/22
- Bright sun (clear shadows): f/16
- Hazy sun (soft shadows): f/11
- Overcast (shadows faint): f/8
- Heavy overcast / open shade: f/5.6
The shorter version? Every time the light drops a notch, open up one stop.
White balance - why is my image orange?
- Daylight white balance is a solid match for bright sun
- Cloudy warms things up a bit (often nicer for skin)
- Shade warms things up more (because shade light is bluer)
- Auto WB does a good job except in a series - if the light changes at all, the white balance will be different for each image, and it'll be harder to make the WB on each image the same.
If you want consistency across a series, pick a preset (Daylight or Cloudy) and stick with it for that set.
White balance adjusts color so whites look white and skin tones look normal. It balances warm tones (yellow and red) against cool tones (blue). When it’s off, your photo usually looks too orange or too blue.
Focal length + field of view
Focal length is the distance between the lens and the sensor when your subject is in focus, measured in millimeters (mm). In real life, it controls two big things: how much you see and how your scene feels.
- Short focal length (wide-angle), like 24mm
- Shows more of the scene
- Great for landscapes and architecture
- Can make distances look bigger than they felt in person
- Long focal length (telephoto), like 200mm
- Shows less of the scene
- Pulls distant subjects closer
- Makes backgrounds look bigger and closer to your subject
Field of view is simply how much of the world fits in the frame, often described in degrees. It’s directly tied to focal length.
- Shorter focal length = wider field of view
- Longer focal length = narrower field of view
Think of focal length as your lens’s “zoom level,” and field of view as how much of the scene fits in the frame.
Lenses and focal lengths
Prime vs zoom lenses
- Prime lens: one focal length (example: 50mm). Often sharp. Often lets in more light (wider aperture).
- Zoom lens: a range of focal lengths (example: 24–70mm, 70–200mm). Lets you reframe without swapping lenses.
Common lens categories (full-frame numbers)
- Standard: around 50mm
- Feels close to “normal” human view
- Works for a lot of things
- Wide-angle: 35mm and below
- Big scene, tight spaces, landscapes
- Can distort faces and stretch edges if you get too close
- Telephoto: 70mm and above
- Sports, wildlife, portraits
- Compresses the background in a way people tend to like
- Macro
- Built for close focusing and small details (bugs, flowers, textures)
- Macro describes close-up ability, not a specific focal length
Zoom vs telephoto (the confusion that never dies)
- Zoom describes whether the lens changes focal length.
- Telephoto describes a lens that reaches longer focal lengths.
- Short focal length (wide-angle), like 24mm
Understanding how focal length affects perspective (and faces)
Focal length changes perspective mostly because it changes how close you stand to fill the frame.
- Wide-angle up close can make noses look bigger and ears drift backward
- Telephoto from farther away tends to flatter faces and smooth features
Common focal lengths by genre
| Genre | Common focal lengths |
|---|---|
| Landscape | 12–35mm |
| Portrait | 85–135mm |
| Street | 24–35mm |
| Wildlife | 200–600mm |
| Sports | 70–200mm, 200–400mm |
Resources
Understanding Focal Length
https://www.nikonusa.com/learn-and-explore/c/tips-and-techniques/understanding-focal-length
What is Lens Distortion?
https://photographylife.com/what-is-distortion
Depth of Field (DoF) calculator | PhotoPills
https://www.photopills.com/calculators/dof
Lens Visualizer Tools – DT Photo
https://www.photo-digitaltransitions.com/support/lens-visualizer-tools/
What is a 35mm Lens Good For? | ComposeClick
https://composeclick.com/what-is-a-35mm-lens-good-for/
Why the 18-55mm Kit Lens is Actually Amazing (Not Trash)
https://www.upskillist.com/blog/the-underrated-18-55mm-kit-lens/#:~:text=At%2018mm%2C%20it%20is%20fairly,55mm%20works%20wonders%20for%20portraits.
Is the Canon EF 70-200mm f/2.8L IS II USM Telephoto Zoom Lens the Best Wedding Photography Lens? – Hand and Arrow Photography
https://handandarrow.com/is-the-canon-ef-70-200mm-f28l-is-ii-usm-telephoto-zoom-lens-the-best-wedding-photography-lens/#:~:text=Playing%20with%20the%2070%2D200mm’s%20strengths&text=By%20being%20able%20to%20zoom,portraiture%2C%20wedding%20ceremonies%2C%20etc.
Best macro lenses for mirrorless: these are the lenses I’d choose for super-sharp close-ups | Amateur Photographer
https://amateurphotographer.com/buying-advice/best-macro-lenses-for-mirrorless-and-dslrs/
Wide angle lens: A beginner’s Guide | Adobe
https://www.adobe.com/creativecloud/photography/discover/wide-angle-lens.html
Use tilt shift for creative focus effects – Adobe
https://www.adobe.com/creativecloud/photography/technique/tilt-shift.html
What is White Balance in Photography?
https://photographylife.com/understanding-white-balance
Interactive Color Temperature Chart | Giggster
https://giggster.com/guide/color-temperature-chart/
How changing the focal length affects how a person’s face appears : r/cinematography
https://www.reddit.com/r/cinematography/comments/5pyntd/how_changing_the_focal_length_affects_how_a/
The Essential Guide to Camera Light Meters
https://digital-photography-school.com/understand-camera-light-meter-desired-exposure/
Amazon.com : Sekonic LiteMaster Pro L-478D-U Light Meter, Touchscreen Incident & Reflected Meter with Flash Analyzing, Cine Frame Rate & Shutter Angle Control, Illuminance & Luminance Measurement : Electronics
https://www.amazon.com/Sekonic-LiteMaster-L-478D-U-Light-401-474/dp/B01ARGBWU8/ref=sr_1_4?crid=1UWSYV9H0XHHL&dib=eyJ2IjoiMSJ9.Kx7kCETtD5LhvCJ1UpphvG8BtF5dlqTzW7cI5h481D9Qqi64FbeG6cJcBcd1D6o4_vfT89t6GqDX9Epc7gt_u7ohvB0MBquhKOTlredhwW5ylnX–4TgcJRMZ3VFHL7SgOD27VXRuU-YtVvIglsBCb1zmytagXTbbN-AtrLzLhAytS8QzFLRkpMKH58FFlojBIW0ud3goeb7F5vIA39xszTaAoyyYMP2iURHgktPBYI.W0HFV0ioBl48p6PKkRgEogM2wF-I6ZNARU9N-M5eLgs&dib_tag=se&keywords=incident+light+meter+photography&qid=1779130483&sprefix=incident+meter%2Caps%2C685&sr=8-4
viqT2zCJxF6q5w4zZiFeUf-1200-80.jpg.webp (1200×1172)
https://cdn.mos.cms.futurecdn.net/viqT2zCJxF6q5w4zZiFeUf-1200-80.jpg.webp
sunny-16-chart.jpg (1186×720)
https://petapixel.com/assets/uploads/2022/04/sunny-16-chart.jpg
Equivalent Exposure Calculator, or Compare Any Two Camera Exposures
https://www.scantips.com/lights/exposurecalc.html

Class 4: Shutter speed, Drive Mode and recap
Overview: We took a deeper look at shutter speed, learned about drive modes. Then we recapped the exposure triangle.
Shutter speed is how long the camera’s shutter stays open during an exposure. It’s measured in seconds or fractions of a second.
How shutter speed affects exposure (brightness)
Shutter speed controls how much light reaches the sensor.
Faster shutter speed (shutter open for less time) → less light → darker image.
Slower shutter speed (shutter open longer) → more light → brighter image.
Changing shutter speed may require adjusting aperture and/or ISO to keep exposure balanced.
How shutter speed affects motion
Shutter speed controls how motion is rendered.
Fast shutter speeds freeze motion (useful for sports, active kids, fast action).
Slow shutter speeds show more motion blur because movement is recorded while the shutter is open.
Motion blur can be used intentionally for creative effects, but exposure may need rebalancing to avoid overexposure.
Stability and when to use a tripod
Slower shutter speeds increase the risk of blur from camera shake (hand movement).
Camera shake is different from intentional motion blur and is generally something to avoid.
Stabilization (tripod or similar support) is recommended at slower speeds, especially if hands are unsteady.
Drive Modes
- your camera may not have all of these. By using these, we are telling the camera how many photos to take at a time.
- Single Shot Mode
When to Use: Ideal for most types of photography, including portraits, landscapes, and still life.
How It Works: The camera takes one photo each time you press the shutter button. This mode is great for controlled environments where you have time to compose your shot. - Continuous Shooting Mode (Burst Mode)
When to Use: Perfect for action photography, such as sports, wildlife, or any fast-moving subjects.
How It Works: The camera takes multiple photos in quick succession as long as you hold down the shutter button. This increases your chances of capturing the perfect moment. - Self-Timer Mode
When to Use: Useful for group shots, self-portraits, or long exposures where you want to avoid camera shake.
How It Works: The camera delays the shutter release for a few seconds after you press the button, giving you time to get into position. - Remote Release Mode
When to Use: Ideal for situations where you need to avoid touching the camera, such as long exposures, macro photography, or wildlife photography.
How It Works: You use a remote control to trigger the shutter, minimizing the risk of camera shake. - Mirror Lock-Up Mode
When to Use: Best for long exposures or macro photography where even the slightest vibration can affect image sharpness.
How It Works: The camera locks the mirror in the up position before taking the shot, reducing internal vibrations. - Quiet Mode (Silent Shutter Mode)
When to Use: Useful in quiet environments like weddings, wildlife photography, or any situation where you need to minimize noise.
How It Works: The camera reduces the noise made by the shutter and mirror mechanisms. - Auto-Exposure Bracketing (AEB)
When to Use: Ideal for high-contrast scenes or HDR photography.
How It Works: The camera takes multiple shots at different exposure levels (e.g., one underexposed, one correctly exposed, and one overexposed) to capture a wider dynamic range.
Tips for Using Drive Modes:
Action Shots: Use Continuous Shooting Mode to capture fast-moving subjects.
Group Photos: Use Self-Timer Mode to ensure everyone, including the photographer, is in the shot.
Long Exposures: Use Remote Release or Mirror Lock-Up Mode to avoid camera shake.
Quiet Environments: Use Quiet Mode to minimize shutter noise.
Resources
Shutter Speed Photography – Shutter Speed Chart
https://www.photographer.org/shutter-speed/
What Are Drive Modes on Your Camera and How to Use Them? – Digital Photo Mentor
https://www.digitalphotomentor.com/camera-drive-modes/
‘Help! My Photos Are Not Sharp.’ How Can You Avoid Blurry Images? | Fstoppers
https://fstoppers.com/education/help-my-photos-are-not-sharp-how-can-avoid-blurry-images-650414
Articles | PhotoPills
https://www.photopills.com/articles
Homework
Capture the same scene three ways:
- A good exposure
- One stop underexposed
- One stop overexposed
The key is to change one setting at a time (ISO, shutter speed, or aperture) so it’s clear what each setting does.
Setup
- Sit in one spot and choose a scene that won’t change much for a few minutes (no fast-moving subjects).
- Keep the camera pointed at the same composition for the whole exercise.
Step 1: Make a “good exposure” (your baseline)
- Set a starting ISO (pick something reasonable for the light, like ISO 100–400 outside or ISO 400–1600 inside).
- Choose an aperture and shutter speed that make sense for the scene.
- Take a test photo.
- Use your meter (the exposure scale in the viewfinder/back screen) and/or the histogram to adjust until the exposure looks good.
- Take the baseline photo and label it (in your notes or by memory): Baseline (0).
Step 2: Underexpose by one stop (−1) — change ONE variable
Take three separate “−1 stop” photos, each created a different way. After each photo, return to the baseline settings before trying the next method.
Method A: ISO only
- From the baseline, change ISO down by 1 stop.
- Example: 400 → 200, or 800 → 400
- Keep shutter speed and aperture the same.
- Take the photo. (This should be −1.)
Method B: Shutter speed only
- Return to the baseline.
- Change shutter speed faster by 1 stop.
- Example: 1/125 → 1/250, or 1/60 → 1/125
- Keep ISO and aperture the same.
- Take the photo. (This should be −1.)
Method C: Aperture only
- Return to the baseline.
- Change aperture smaller by 1 stop (a higher f-number).
- Example: f/4 → f/5.6, or f/5.6 → f/8
- Keep ISO and shutter speed the same.
- Take the photo. (This should be −1.)
Step 3: Overexpose by one stop (+1) — change ONE variable
Take three separate “+1 stop” photos, each created a different way. After each photo, return to the baseline settings before trying the next method.
Method A: ISO only
- From the baseline, change ISO up by 1 stop.
- Example: 200 → 400, or 400 → 800
- Keep shutter speed and aperture the same.
- Take the photo. (This should be +1.)
Method B: Shutter speed only
- Return to the baseline.
- Change shutter speed slower by 1 stop.
- Example: 1/250 → 1/125, or 1/125 → 1/60
- Keep ISO and aperture the same.
- Take the photo. (This should be +1.)
Method C: Aperture only
- Return to the baseline.
- Change aperture wider by 1 stop (a lower f-number).
- Example: f/8 → f/5.6, or f/5.6 → f/4
- Keep ISO and shutter speed the same.
- Take the photo. (This should be +1.)
After you’ve taken all the photos, compare them side-by-side.
- Which method changed the look of the photo the most (depth of field, motion blur, noise)?
- Which method changed the exposure without changing the look much?
- Which setting would you choose first in this lighting situation, and why?

Class 3: Aperture, Depth of Field and Focus Points
Overview: We quickly reviewed the Exposure Triangle and dove right into Depth of Field and shutter speed. We did some activities and looked at Focus points, including Back button Focus.
Depth of Field (DoF) calculator | PhotoPills
- Definition
- The zone from the nearest to the farthest point in your scene that remains in focus. Imagine you’re taking a portrait: DoF determines whether just the subject’s eyes are sharp or if their entire face is in focus, along with the background.
- Key Points about Depth of Field
- Acceptably Sharp: The term “acceptably sharp” is subjective. It depends on factors like how you’ll view the image (print, screen, etc.) and your vision.
- Factors Influencing DoF
- Aperture: The size of the lens opening (measured in f-stops) significantly affects DoF. Larger apertures (smaller f-stop numbers) create a shallow DoF, where only a small slice of the image is in focus. Smaller apertures (higher f-stop numbers) result in a deeper DoF, where more of the scene is sharp.
- Camera-Subject Distance: The closer you are to your subject, the shallower the DoF. Conversely, greater distance increases the depth of field.
- Focal Length: Longer lenses (higher focal lengths) tend to have shallower DoF, while wider lenses (shorter focal lengths) provide more depth.
- Sensor Size: Larger sensors (commonly found in full-frame cameras) generally yield shallower DoF compared to smaller sensors (like those in crop-sensor cameras).
- Visualizing DoF
- Imagine a narrow DoF as a photo where only a small sliver is in focus (like a blurred background behind a subject).
- Conversely, a large DoF means much more of the scene is sharp (think landscapes where both foreground flowers and distant mountains are clear).
- Practical Tips
Portraits: For creamy backgrounds and subject isolation, use wider apertures (e.g., f/1.8 or f/2.8).
Landscapes: Smaller apertures (e.g., f/8 or f/11) help keep everything sharp from foreground to background.
Experiment: Play with different settings to see how DoF changes. It’s a creative tool!
Focus Point Options – you may not have all of these! They are camera dependent. Use these is telling the camera what you want it to focus on.
- Single-Point AF
- Description: This mode allows you to select a single focus point manually. The camera will focus on the subject located at that specific point. This is my usual go-to.
- When to Use: Ideal for precise focusing, such as in portrait photography where you want to focus on the subject’s eyes. It’s also useful for still subjects and when you need to control exactly where the focus should be1.
- Dynamic Area AF
- Description: You select a single focus point, but the camera also considers surrounding points to maintain focus if the subject moves slightly.
- When to Use: Great for photographing moving subjects, such as children playing or animals in motion. It provides a balance between precision and flexibility.
- Zone AF
- Description: The camera divides the frame into zones, and you can select a zone where the camera will focus. It uses multiple focus points within that zone.
- When to Use: Useful for subjects that move within a specific area of the frame, such as sports photography or events where the action is concentrated in one part of the scene. Best if you don’t care what the camera focuses on (random people on a team, in a crowd, a flock of birds, etc).
- Auto-Area AF
- Description: The camera automatically selects the focus points based on the subject’s position and movement. It often uses advanced algorithms to detect faces or subjects.
- When to Use: Best for quick snapshots or when you need to capture a moment without having time to manually select focus points. It’s convenient for casual photography and situations where the subject is unpredictable. When in doubt, don’t use this.
- Group-Area AF
- Description: This mode uses a cluster of focus points to track a subject. It’s more focused than Zone AF but covers a larger area than Single-Point AF.
- When to Use: Ideal for tracking larger subjects or groups of people. It’s useful in wildlife photography where the subject might move unpredictably, or when your subject (or kid) is kinda far away and you just need their head to be in focus.
Summary of When to Use Each Focus Point Option (remember to keep depth of field in mind)
- Single-Point AF: Portraits, still subjects, precise focusing.
- Dynamic Area AF: Moving subjects, children, pets.
- Zone AF: Sports, events, concentrated action.
- Auto-Area AF: Quick snapshots, casual photography, unpredictable subjects.
- Group-Area AF: Wildlife, groups of people, larger subjects.
Tips for Using Focus Points
- Focus and Recompose: For static subjects, you can use the focus and recompose technique. Focus on your subject using a single point, then recompose your shot while keeping the focus locked. This advice is often given to beginners, but remember depth of field – if you shift your plane when you recompose, your subject might not still be in focus. I never got this to work, your mileage might vary.
- Back-Button Focus: Consider using back-button focus to separate focusing from the shutter release. This can give you more control, especially in dynamic shooting situations. This is what pros use.
- Make subject speed changes in Focus Menu
- If camera won’t focus, step back a step (you maybe too close)
Focus Modes – Telling the camera how to focus.
1. Single Shot Autofocus (AF-S or One Shot AF)
- When to Use: Ideal for stationary subjects like landscapes, portraits, buildings or still life.
- How It Works: The camera focuses when you half-press the shutter button and locks the focus until you take the shot. This ensures your subject remains sharp as long as it doesn’t move.
2. Continuous Autofocus (AF-C or AI Servo AF)
- When to Use: Best for moving subjects such as sports, wildlife, or children playing.
- How It Works: The camera continuously adjusts focus as the subject moves, ensuring it stays sharp even if it changes position. It can hunt for focus or eat up your battery or both!
3. Automatic Autofocus (AF-A or AI Focus AF)
- When to Use: Useful in unpredictable situations where subjects might switch between being stationary and moving.
- How It Works: The camera automatically switches between single and continuous autofocus modes based on the subject’s movement. My camera used to have this and it was my favorite.
4. Manual Focus (MF)
- When to Use: Ideal for precise focusing needs, such as macro photography, low-light conditions, or when autofocus struggles.
- How It Works: You manually adjust the focus ring on the lens to achieve sharpness. This mode gives you full control over what part of the scene is in focus if you can see it! You may need to look at your Live View and zoom in if you camera has that capability. Cameras are much better at focusing than we are as a general rule.
Tips for Using Focus Modes:
- Portraits: Use AF-S to lock focus on the subject’s eyes.
- Action Shots: Use AF-C to track and maintain focus on moving subjects.
- Low Light: Switch to MF if the camera struggles to find focus.
- Mixed Situations: Use AF-A to let the camera decide the best mode based on the situation.
Bonus material: File handling basics (so you don’t lose photos)
- Don’t format until you’ve confirmed import + backup
- One simple folder structure
- One copy is the same as having zero copies – try to back up your photos to three places. 1) a cloud backup service, 2) a second copy on your computer, 3) your card until you know it’s been backed up to the cloud.
Resources
bokeh – Google Search
https://www.google.com/search?q=bokeh&sca_esv=9eff12e450c8c5f1&rlz=1C1CHZN_enUS1119US1119&udm=2&biw=1344&bih=706&sxsrf=AE3TifNk4hucsWeK3SR413Z89RcRAzfYqA%3A1759416435030&ei=c5DeaITAAfvIp84PhePpgAs&ved=0ahUKEwjExfz84IWQAxV75MkDHYVxGrAQ4dUDCBE&uact=5&oq=bokeh&gs_lp=Egtnd3Mtd2l6LWltZyIFYm9rZWgyCBAAGIAEGLEDMggQABiABBixAzIIEAAYgAQYsQMyCBAAGIAEGLEDMgUQABiABDIFEAAYgAQyBRAAGIAEMgUQABiABDIFEAAYgAQyCxAAGIAEGLEDGIMBSMoWUJAFWMAScAF4AJABAJgBUKABlwGqAQEyuAEDyAEA-AEBmAIDoAKiAcICBhAAGAcYHsICBxAjGCcYyQLCAgoQABiABBhDGIoFmAMAiAYBkgcBM6AHzAqyBwEyuAeeAcIHBTAuMi4xyAcH&sclient=gws-wiz-img#sv=CAMSURoyKhBlLTJpNDdGSzlBbmpiUlRNMg4yaTQ3Rks5QW5qYlJUTToOZy10U1g1MTI0c3F2Q00gBCoXCgFzEhBlLTJpNDdGSzlBbmpiUlRNGAEwARgHIICNrLkESggQAhgBIAIoAQ
Depth of Field (DoF) calculator | PhotoPills
https://www.photopills.com/calculators/dof#embed
The Web’s Original CameraSim
https://www.camerasim.com/original-camerasim
Exposure Simulator
http://www.andersenimages.com/tutorials/exposure-simulator/
DIY – Create Your Own Bokeh
https://www.diyphotography.net/diy_create_your_own_bokeh/
so busy_SMB5296 | One of the best intersections in all of Ch… | Flickr
https://www.flickr.com/photos/stevebond/21144458031/in/photolist-ydsSHe-MDgQzK-23jSC4r-CuDGvR-P6odd9-Ek3aPB-on4EvS-QSmZ6g-27k6xoR-21XKHUn-TbKAKv-2erRHND-MDgQ7k-JjoLfD-dnvbxE-b7Qni8-TtxvfE-dXbbGu-eiV5z5-e5fYav/
Focusing in Photography Explained – How to Focus in Photography
https://capturetheatlas.com/focusing-in-photography/#:~:text=Focus%20points%20in%20photography%20are,focusing%20points%20than%20mirrorless%20cameras
Camera Focus Points Explained – PhotoWorkout
https://www.photoworkout.com/camera-focus-points/
What is Back Button Focus and Why You Should be Using It
https://photographylife.com/back-button-focus
Camera Focus Modes Explained: AF-S, AF-C, Manual & More
https://greatbigphotographyworld.com/blog/focus-modes
premiere-photo-homme-paris.jpg (1200×862)
https://www.unjourdeplusaparis.com/wp-content/uploads/2015/05/premiere-photo-homme-paris.jpg
Homework
Look at the Camera Simulators
Activity :
Aperture experiment: get one, two or three items in focus. Start at your lowest aperture, a shutter speed of 1/100 and iso 100, and raise your aperture (and compensate with your other settings) until the depth of field is deep enough to have everything in focus.
Shutter speed: start at the same setting set as above, and keep increasing your shutter speed to capture fan blades or a flag waving or cars (have situational awareness!!! be safe!!!!).

Class 2: "Good Exposure" and Histograms
Overview: We looked at what makes a “Good Exposure” and talked about how we measure light in stops. We also looked at Flickr images and explored what we like visually, as well as develop our eye for our style, subject and tone. ALSO – please excuse the formatting, WordPress is hard.
Understanding Exposure – What is a Good Exposure?
In photography, “good exposure” refers to an image that has the optimal balance of light and dark areas, ensuring that details are visible in both the highlights (bright areas) and the shadows (dark areas). A good exposure means that the image accurately represents the scene as intended by the photographer, without being too bright (overexposed) or too dark (underexposed). Cameras measure the scene and want its settings to equal 18% grey (the midpoint between darkest shadows and lightest highlights).
We increase or decrease our exposure in ‘stops’. ‘Stops’ are relative to your initial exposure (unless you want to do math). The difference between stops is either twice the amount of light or half the amount of light, depending on if you are letting more light into your camera or less light into your camera. Stops can be full stops, 1/2 stops or 1/3 stops.
We read our exposure on our in-camera meter that I call ‘the ticker’ – the middle of the ticker is a good exposure.
Key Elements of a Good Exposure:
- Detail in Highlights and Shadows:
- The brightest parts of the image (highlights) retain detail without appearing “blown out” or pure white. Our example was the white bird.
- The darkest parts of the image (shadows) retain detail without appearing completely black.
- It’s easier to bring back detail in the blacks and shadows than in blown highlights – this is the opposite of film!
- Correct Overall Brightness:
- The image is not too dark (underexposed) or too bright (overexposed). The mid-tones are well-balanced.
- Proper Contrast:
- There is an appropriate range of tones from dark to light, showing depth and dimension to the image.
- Color Accuracy:
- Colors appear natural and true to life, unless a specific artistic effect is intended.
- Intentional Exposure:
- The exposure matches the photographer’s creative vision and intent, whether it’s aiming for a realistic representation or a specific mood or effect. Choosing your intentional exposure is an artistic choice.
- Ansel Adams Zone System – just know it exists
Exposure triangle
- Shutter Speed:
- Controls the duration of light hitting the camera sensor. Faster shutter speeds let in less light, while slower shutter speeds let in more light.
- Aperture:
- The size of the lens opening that allows light to enter. Larger apertures (smaller f-numbers) let in more light, while smaller apertures (larger f-numbers) let in less light. This is a sneaky part of photography. Aperture and focal distance control depth of field – more on this later.
- ISO:
- The sensitivity of the camera sensor to light. Lower ISO values require more light but produce less noise, while higher ISO values are more sensitive to light but can introduce noise. Lots of noise/grain can make the image less sharp/in focus, and can look icky.
- Shutter Speed:
Factors Affecting Exposure: The Exposure Triangle
- Lighting Conditions:
- Natural and artificial light sources, their intensity, direction, and quality affect the exposure.
- Reflectivity of the Scene:
- The brightness and colors of the subjects and backgrounds in the scene can impact the overall exposure. (e.g., Snow vs dusk)
Achieving Good Exposure:
- Finding the right balance between these factors to capture an image that is visually pleasing and meets the photographer’s goals, which is subjective!
Homework
- Assignments
- Take photos from photo bingo and submit them to me via WeTransfer.com. Pick a row from your bingo chart to go shoot. Bingo Card Sets with photo prompts. Shoot at F/8!
- Figure out your minimum handheld shutter speed by starting in Shutter speed priority mode and photograph a stationary object. Keep lowering your shutter speed and taking photos until the object is blurry from camera shake. The shutter speed above that is your minimum handheld shutter speed. This may change with different lenses, but it’s a starting point to be aware of.
- Google how to turn the ‘blinkies’ (Canon) or ‘zebra stripes’ (Nikon) on for your camera.
- Send me more Flickr URLs, 2-3 per person if you haven’t already.
Resources
The Exposure Triangle – A Beginner’s Guide
Exposure Stops in Photography – A Beginner’s Guide
https://photographylife.com/what-are-exposure-stops-in-photography
Understanding Histograms in Photography
Exposing to the Right Explained
https://photographylife.com/exposing-to-the-right-explained
Histogram: Discover How To Take Better Photos By Exposing To The Right
https://photographypro.com/histogram/
Underexposure vs Overexposure – A Beginner’s Guide
https://photographylife.com/underexposure-and-overexposure-in-photography



Class 1: Camera overview
Overview: We made introductions and dove right into to learning how to change our shutter speed, aperture and ISO. We also figured out how to move our focal points! We looked at the EXIF metadata of some Flickr images and started to talk about what we like and why we like it.
Parts of the camera
The images above should help you identify parts of your camera. We looked at:
- Shutter
- Focus – half press
- Viewfinder
- Numbers on lenses
- Modes – Manual
- Metering Modes (just id’d it on the LCD)
- Focus modes and focusing (same)
- Choosing image size (RAW vs jpeg)
- White Balance (LCD)
- Drives (LCD)
- Flash AND/OR hot shoe
- Fractional stops (full stops vs 1/2 or 1/3 stops)
- Exposure meter (LCD or through viewfinder)
Resources
As we go, I’ll give you more resources here.
Homework
- Note Down the Specs of Your Camera and Lens
- Flash or no flash?
- Number of focal points
- ISO range
- Aperture min – max
- Crop sensor or Full Frame?
2. Identify 3-5 Images You Like on Flickr – Be prepared to talk about why you like it. Even better if it has EXIF data.
3. Practice Changing ISO, SS, and AP Without Looking at Camera – Watch exposure meter and try different combos. Take photos at different combos and see if photo is too dark, too light, or just right. The table is at the bottom of this.
4. Practice engaging focus by putting your subject underneath your focal point and half-pressing your shutter button
5. Practice Identifying Parts of the Camera
Full Stops
| ISO | Aperture (f-stop) | Shutter Speed (seconds) |
|---|---|---|
| 100 | f/2.8 | 1/1000 |
| 200 | f/4 | 1/500 |
| 400 | f/5.6 | 1/250 |
| 800 | f/8 | 1/125 |
| 1600 | f/11 | 1/60 |
| 3200 | f/16 | 1/30 |
| 6400 | f/22 | 1/15 |
| 12800 | f/2.8 | 1/8000 |
| 25600 | f/4 | 1/4000 |
| 51200 | f/5.6 | 1/2000 |
1/2 and 1/3 stops
| ISO | Aperture (f-stop) | Shutter Speed (seconds) |
|---|---|---|
| 100 | f/2.8 | 1/1000 |
| 125 | f/4 | 1/800 |
| 160 | f/5.6 | 1/640 |
| 200 | f/8 | 1/500 |
| 250 | f/11 | 1/400 |
| 320 | f/16 | 1/320 |
| 400 | f/22 | 1/250 |
| 500 | f/2.8 | 1/2000 |
| 640 | f/4 | 1/1600 |
| 800 | f/5.6 | 1/1250 |
